Product Overview
**PLEASE NOTE, our CHROME and BLACK versions are currently out of stock until further notice **
No-knots required!
Easy to use and secure.
Low-profile, no tangles.
Use with solid braid 1/4" - 3/8" lines (do not use hollow-braid or 3-strand ropes).
Ideal for anchoring from your bow, stern, or side rails.
Tie-off to the dock or use with anchors, drift socks, or with boat fenders.
Chrome and Black epoxy-coat finishes use a zinc alloy for freshwater use only.
Stainless Steel (Model 331) uses marine grade 316 stainless steel for saltwater use.
For installing over carpeted decks, please choose the bottom plate option. The stainless steel bottom plate is cut to match the cleat diameter and mounting holes. This plate keeps the carpet fibers from interfering with the rotation of the cleat cam.
If you have a Bert's Custom Tackle, Traxstech, Cisco, or other 3.5" wide mounting track, considering our track adapter (see pic below). The adapter consists of 10ga stainless steel plate that is 3.05" wide to fit the interior slot of the track. Just slide the cleat and adapter onto the mounting track from one end, then tighten the two allen nuts. Easy as that! Now you can use the Quick Cleat to run anchors, drift socks, hang boat fenders, or just use to tie-up your boat.
Bottom Plate Option
Chrome/Model 320 and Black/Model 325 |
Stainless Steel/Model 331 |
45-degree Bracket for built-in Gunnel Tracks.
Mounting Track Adapter kit, fits most 3.5" wide mounting tracks.
Made in the USA